...the process the SID display beeped and said to check the trunk lid or close the trunk lid, this stopped the process of dropping the top. I checked the trunk and found it both locked and secured
match the thread of the stud. The nuts will be used to install the stud. Thread The stud into the thermostat housing. Once it is tight by hand stop. Thread the first plain nut onto the stud far enough
...Hyundai Elantra I have a 2016 Hyundai Elantra and my Radio, Dash Clock, USB Port, and Power Mirrors stopped working. I changed the fuse (module 6) with ATM-10 amp and it didn't work, checked the fuse ...
...stop and doesn't shift to over drive when you run it. If you shift to low manually it will work. I am a deisel mechanic and will be working on this myself but don't have much knowledge of the valve ...
stop flashing (usually ten or fifteen minutes) then turn the key off and try to start it. On some you need to do that procedure three times without starting but most will re-start after doing it once.
stop spraying the engine starter the car would cut off.I am being told to replaced the computer in the car.Before spending any more money is there anything else I can possibly do to get my car running
...stop.The gears in the motor slip the door opens a little bit then closes again and slips again . So you hear this bump bump bump all the time . Would this need a new motor or switch? I removed the ...
...stop. Reason I say this is because you "definitely" had a CHECK ENGINE light come on at one (some) point prior to this "hill" scenario (you just may not have noticed it, or else put it in the back of ...
424 questions posted
Usually answered in minutes!
367 Questions
320 Questions
155 Questions
123 Questions
63 Questions