Question about Land Rover Range Rover
...front wheel drive shafts are on the way out and should be replaced. They should be replaced as a pair (both sides) so that you have uniform wear, but you can replace the bad one to solve the problem. ...
...drive car. front wheel drive cars have cv or constant velocity axles on the front these are attached to the transmission so in short no there is no power to the rear wheels through a driveshaft or a ...
...front drive shaft ? I need to replace the front drive shaft and am not sure how to do so? Mark the drive shaft postion to the transfer case and front axle. Remove the bolts/straps from the transfer ...
Question about Land Rover Range Rover
...front drive shaft Toyota tacoma 1998 4x4 Shifting into 4x4 hi from 2x4 hi I can feel shift lever engage the front differential.....crawling underneath truck I can confirm front driveshaft is engaged. ...
Question about Land Rover Range Rover
...drive. front drive shaft truns all I have a 93 sub with 4 wheel drive. With transfercase in 2wheel , if I jack up either front tire ans spind the tire the fron drive shaft turns, should it? Yes the ...
front drive shaft does the front drive shaft turn when not in 4wd on a 1998 chevy truck. The front drive shaft is worn where it is splinned together which might be causing vibration. no only the front
Question about Cars & Trucks
...drive to front wheels. Front wheel shafts not turning, no diff. I am thinking that you have a broken/ stripped drive spline on a front axle. If you have reduction gears in the hubs , it may be ...
front drive shaft (assuming you are talking about the front CV boots).1) Jack up the front end of the vehicle.2) Remove front wheel(s), track rod ends and slacken [don't remove completely just yet
...front drive shaft remove the drive yoke off the pinion shaft remove the old seal install new seal install front drive shaft. PS check pinion bearing play before removing drive yolk. if it is loose ...
...front wheels. These drive shafts are about one to 2 feet long, and each one drives a front wheel. That is why there are 2. These steel drive shafts have a large joint at each end of them, so you see ...
239 questions posted
Usually answered in minutes!
340 Questions
202 Questions
166 Questions
166 Questions
112 Questions