2003 Land Rover Freelander "brake swicth" Questions

...swicth is not tripped. The Inertia switch is installed to make sure the fuel supply is cut off in case of acident or if you have a heavy vibration. Just look for it and reset it by pressing it down. ...

all my lights work except my brake lights. all my fuses are fine the brake light swicth is at the top of brake pedal remove wires from swicth and brigde together if lights work replace swicth

...of my headlights and my brake lights wont shut off the only way to get it to turn off is to unplug the battery there A BRAKE SWICTH BEHIND THE BRAKE PEDAL SWICTH THE OUT AND SEE ,IT,S A BRAKE ...

...brake swicth. If the rubber stopper is gone, worn down or broken, replace it or fill the gap with epoxy glue. Once repaired/replaced check that when you press the brake, the lights come on and when ...

...brake lights go out when turn signal is engaged.all bulbs, fuses and relay are good. you need to replace the multifuction swicth (turn singnal swicth) that controll all of that stuff i have replaced ...

replace ligth swicth dimmer swicth brakes and singal litghs work no head ligths Sounds like your turn signal switch is bad!! Multi-functioning switch it controls your head lights two? Unless you have ...

...brake switch is inserted onto the peg (swicth has a whole in it that fits onto peg) then clip snaps onto end of peg left exposed after brake switch is in place. As you apparently know, If that swicth ...

...swicth there is a brake light switch behind the brake pedal that may require replacing.  There is always a chance you lost the brakes bulbs one at a time as well so check the bulbls ...

brake lights do not work. It is not the bulbs, switch or fuse. What else could it be? check the brake swicth on the brake peddle

...jeep wrangler sahara, turn and emerg. ok have changed stop lamp switch, checked for voltage on the pk/db wire O volts, all fuses ok. check brake swicth on brake pedal first check all chasis