2003 Land Rover Discovery "put brake light switch 10" Questions

...put the brake handle down, 9 out of 10 times the switch gets pushed to the side or broken so when you put the brake handle down it does not push the switch down. this would be the first place I would ...

...Put brake fluid in & pressed brake pad just to hear a noise like it spitting out just underneath my driver side door. I dont know how to find what kind of replacement brake line I need to get? Help! ...

...brake lever and put a small cotter pin across the two terminal then check the brake light,if they work,replace the switch.good luck .I've been changing about 10 ford switch per year at my shop. ...

...put my foot on the brake pedal my brake lights work for a second and then go out. Is it the part under the brake pad arm, and if it is what is that part called and is it a dealer purchase item only ...

...brake lights don't work.......put new ones......still don't work......change the fusie(10 amp)..still don't work......changing the fusie under the brake pattle...lights still don't work...what else ...

brake lights off and I can't put this van on gear. Look up above your brake pedal and you should see a switch that is connected to it. This switch controls your brakes and in some vehicles, is tied in

put it into drive. But if i park back to step one. Check fuse #41, if its good then the brake switch may need replacing. You can test the power to the switch by the use of a voltage meter touching the

...put it into Drive Fuse 17 10amp protects the following 1)transmission control switch and lamp. 2)brake fluid level switch 3)warning chime 4)diesel warning lamps display 5)fuel water switch 6) low ...

brake pedal so you can put the truck in gear, but if you look under the shifter if it is in the floor (console) you will see a solenoid under the shifter. You can over-ride the solenoid by pressing in

...put your tester on the other wire on the brake light switch and press the brake pedal, If there is power the switch is good and if not the switch is either out of adjustment or bad. If you have power ...