2003 Porsche 911 Carrera "point lug nut socket" Questions

Ad

...lug nut has a 9 point internal spline Your going to have to buy four 9 point socket and a 5 pound sledge hammer, a breaker bar, a pipe, and 4 new lug nuts. If you lost the key to your anti theft lug ...

Ad

...lug nut wrench for my porsche 911 It didn't come with the car that I bought used.. Ok, here's what I would do, and I've done a few ;-) First of all I have to ask, sorry; beg and plead with the ...

Ad

...lug nut without damage is with a SIX POINT socket and a breaker bar or an impact wrench. Using a 12 point socket will deform the cap, causing the wrench to spin on the cap and or the cap to spin on ...

...a tool that goes over the lock and grabs onto it to remove them you can try to hammer a 12 point socket over the lock and see if they come off sometimes it helps to tighten the other lug nuts ...

Question about Cars & Trucks

2 Answers

lug nut covers? Spray som wd 40 or diesel fuel on them. Weargloves an put an xtension on the wrench for mor torque..cud use feet for force..dont rush think safety. A propane torch can break rust bonds

...lug nuts as tightly as you can with the wheel still in the air. At some point the wheel will start turning. 4 Lower the vehicle back to the ground. Tighten the lug nuts progressively in a crisscross ...

lug without the tool? There are tools designed specifically for this problem which you can probably buy at Sears or any parts store, or you can do what we usually end up doing, and that is taking a 12

...lug nut on 2002 jaguar x-type 3.0 (17 inch wheel), deformed with 12 point socket wrench spins now. How to do you remove ? find one size down socket and extension bar then use hammer carefully but ...

Question about Porsche Carrera

1 Answer

...point, however, you can also use a couple of stacked washers and a lug nut. grease the washers, place them over the stud, grease the stud threads and then thread on the lug nut. With a socket wrench ...

lug nuts loose(able to turn easily, by hand if desired) on both sides. then you must locate the vehicle frame underneath, and use the jack on the frame point only, never on the axleshaft or body part,

Not finding what you are looking for?
2003 Porsche 911 Carrera Logo

75 questions posted

Ask a Question

Usually answered in minutes!

Top Porsche Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...