2000 Porsche Boxster "window glass" Questions

glass window hood, any tips to get the new hood tight do i start at the back or front any tip please thanks matt Use hot water on the fabric surrounding the glass,,this will help loosen the fabric for

window adjustment on a boxster where and how Inner door panel off and adjustment is where glass/channel bolts to regulator to move glass backwards and forwards. To adjust top in and out 2 10mm bolts ...

...glass window defroster wireing harness with factory plug cant seem to find other end? look at length of cable with top,then work out max distance it could be then look for it in that region allowing ...

...it. Porsche hasn't figured out how to sew glass in there so they make you buy the whole assembly. U think you bought toyota or honda didn't you. wait till the window actuator fails. a lot more

Glass doors not work' inside 2004 Porsche Boxster cables break frequently on window regulators on these models

...WINDOW GLASS REMOVAL NOTE: Window glass must be operable in order to remove door assembly carrier. Any malfunction that prevents the window (manual or power) from being lowered must be corrected ...

glass window. Its supposed to seal up against the back glass rubber strip that goes up vertical. That creates the seal when the door glass flushes up against the rear glass power window's rubber strip

...window glass. Installation All vehicles CAUTION: Make sure vise jaw protectors are used. NOTE: Make sure that the retaining sleeve is central in the door glass. Attach a new retaining sleeve and ...

...window glass to the full up position. Remove the interior door handle. Remove the rear door speaker. Remove the water shield. Disconnect the rear door window regulator motor electrical connector. ...

glass window. Start at the top and work towards the corners cutting to the given maximum depths: 20 mm 60 mm 75 mm 90 mm Wagon CAUTION: Make sure the cutting blades are changed where the cutting depth