2001 Lincoln Town Car "install hood springs tool" Questions

...install, but the kits have instructions and with a regular set of tools, you should be able to handle it. If you want to see the cracks, jack the car up by the frame so that the back axle drops. ...

...hood, disconnect the black, negative battery cable and loosen the fuel filler cap. Relieve the fuel system pressure. Remove the fuel manifold cover from the top of the engine using a Phillips ...

...with tool sometimes a bolt sometimes a square hole, find tool at parts store , follow diagram near hood latch for belt routing, release tension remove old , install new release tension , good to ...

...install, usually it's best to start the belt around the crankshaft pulley then place around the other pulleys, save the tensioner pulley for last, reinstall the tool and release the tension enough to ...

...hood and locate the Schrader valve on top of the fuel rail. The fuel rail sits on the injectors. It looks like a bicycle tire valve. Remove the cap and use a small screwdriver or similar tool and ...

...hood. The spring broke so I finished cutting it off with my angle grinder, so only thing left is just the strut or shock. Do I need any special tools? Or should I drive it to an auto shop. You will ...

...install new serpentine belt? if there's a way to do so without taking off the motor mount that would be VERY helpful as well*** You'll have to buy or rent the tool used to release the spring tension ...

belt. remove the old belt. When you install the new one. use the same method to replace it. You may see the diagram (Most cars have it) under the hood to tell you how it is wound around the components

Install inreverse order. Tighten the top threenuts to 30 foot pounds. Tighten the strutto knuckle bolts to 90 foot pounds. Tighten lug nutsto 100 foot pounds. If you are notsure if you kept the proper

...install the surpentine belt? The tensioner is spring loaded and requires a special tool to give you enough leverage to pry it back and fit between the engine and the frame of the car. You should be ...