...rear brake rotors and calipers. If you do not take them apart twice a year and clean up rust, lube certain parts, the pads will drag. Also if your caliper is from 2001 it may be all rust ...
Question about Cars & Trucks
how to change rear brake pads on the rear of a 2009 Buick Allure How to change the rear brake pads on a 2009 Buick Allure try youtube
rear brakes how to replace rotors and brake pads on a 2009 gmc acadia this is on a bigger truck but its the same procedure for changing your brakes if you dont have a piston tool you can use a c-clamp
change rear brakes pads Here's a DIY http://fredjfix.blogspot.com/2013/04/diy-passat-cc-replace-rear-brake-pads.html
...on the sensor wears threw I have changed front and rear brake pads of my Audi Q7 model 2012 and the warning light is still on and i want to remove it!I changed only brake pads not sensors.Please
...change the rear breakes but the caliper is not going back. i try a clamp but stil not going back, i open the main brake fluit bottle to release presure but still realy hard. what i can do, my van is ...
change brake pads on a 2009 hyundai elantra That was a close description but not exact. There are no "pins" that need to be removed. You can re lube the sliding pins the caliper bolts go into but they
...change rear brake pads you need a special brake tool to retract the piston back into the caliper, you can rent this tool from any autozone store, other than the special tool its just removing the ...
...rear break pads Rear Disc Brake Caliper ? There is a small tool to turn the caliper pistons in or retract (that is actually the barking brake) You also have to push the piston in, after you screw in ...
...rear brake rotors and pads. Need to know how to compress the rear caliper piston with built in park brake The piston must be rotated as it is pushed into the caliper. There is a special tool for this ...
1,368 questions posted
Usually answered in minutes!
1,383 Questions
1,094 Questions
605 Questions
442 Questions
270 Questions