1991 ford F150 ??? it would maybe fit but the alternator from an 1981 ford anything wouldnt provide enough amperage for the fuel injection system on the 1991 f150... Would it work? How about a starter
...f150 changeing the solenoid and not sure where the wires go on the solenoid the guy that took them off had to leave and im not sure If this is the starter solenoid, the two large wires go on the ...
Question about Lincoln Navigator
how can i find out if my starter is bad have new batery and cylinoid cicking at firewall and lightsb stay on when i turn key hence starter system problem hit (tap) the starter with a hammer
starter motor won't disengage after startup I have an '86 F150 half ton with the 4.9 six cylinder and a 4 speed transmission. I've replaced everything in the starting system, ring gear on flywheel, ...
Question about Lincoln Navigator
f150 4.2 soiloniod 3 prong I replaced the soiloniod, a now it keeps burning up starters. What did hook up wrong? This is the EVTM page on the starting system, don't know if it will help you track down
starter itself.(I had the same problem on my 95 f150) This is usually due to a smaller than required guage of wire running to the starter. try upgrading this wire to a higher guage...make sure to
Question about Cars & Trucks
...f150_starter.jpg Click on the link. At the starter motor, two voltage circuits, one comes from the battery hot all the time. The other circuit goes hot with key in the crank position and is wired ...
...yesterday, Today will not turn over. Battery seems strong. Check plugs and exhaust system check battery and starter connections for loose and corrosion clean good check fuse thats in line to ...
...starter won't work. Head Start by Carr-tech. When I push the button to start the truck the lights flash then nothing happens. Does anyone know how to reset the system? It's in a 1990 Ford F150 5.0L. ...
Question about Lincoln Navigator
...f150 and expeditions. i would guess that the windshied has been replaced. and the windshield is leaking and drippinf on the fuse box and GEM module . you will need to replace you gem and take a look ...
654 questions posted
Usually answered in minutes!
893 Questions
491 Questions
392 Questions
364 Questions
280 Questions