...change all of them, when they all now work? Crank Sensors rarely fail,so what test did you do to determine that was necessary? Also.how would you know ,you had a missing coil, if you had no crank ...
change it as long as I am changing the MAF. Thanks all for your assistance. To my knowledge the MAF relay is mounted in the engine compartment area (As you say under the hood) the two relays there are
...sensor. MAF and labor $400 or so depending on the labor rate. or... check the cam sensor this affects the spark only as the 20valve version has separate ignition and fuel ECU's ...
Question about Ford Cars & Trucks
...change any suggestions would be appreciated I saw what you replaced. I'm not sure about what testing you have done? Were there any applicable trouble codes? How long since a tune-up? If temp related ...
...change when maf unplugged. its expensive to just buy one without knowing how to correctly test it. i have knowlege of old school electronics. i have an analog meter. is there a resistance check? Is ...
Question about Cars & Trucks
...MAF there was a code no change, since then cleaned Idle air control valve and tested, pulled all injectors and cleaned and tested, pulled plugs cleaned and checked gap, cleaned egr valve, has 30 lbs ...
Question about Audi Cars & Trucks
MAF sensor, secondary air injection system, and camshaft actuator on a 2000 Audi A6 2.7T all of these sensors are currently having a short to ground trouble code displayed replaced all 4 o2 sensors no
...MAF sensor and it has not changed anything; If is unplugged the sensor, the car start and run with a strong smell of ammonia, but if I plugged the MAF, the car turn off. I have changed almost every ...
...MAF sensor (was c33), worked great, now c36! where is the location of this "burn off ciruit" at so I can check or change it out? Its not in my manual. The "burn off " relay is located underhood on ...
Question about Lincoln Continental
...MAF, IAC, TPS) EGR, PCV, Fuel Pressure Regulator, Cats, runs great then complete stall, no check engine lights (any more ECM kept throwing false codes, that is why so much replaced. hi, I use to have ...
646 questions posted
Usually answered in minutes!
649 Questions
386 Questions
297 Questions
273 Questions
234 Questions