2006 Kia Spectra "inside panel back door" Questions

...panel. Remove the circular screw cover from the inside door pull storage compartment. Pry it up with the flat head screwdriver. Remove the Phillips screw behind the cover. Remove the screw cover from ...

...inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you ...

...armrest that you'll need to take off...once the panel's off, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the ...

inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don&

...inside the door panel. it may still be under warranty. call them and have the vin ready and they can look in their data base. if they prove to be unhelpful, please feel free to e-mail me and i will ...

...Inside lock mech. gets nearly all the way to unlock but stops short. These might sound like silly suggestions but I've done this. Have you tried unlocking both doors? It might unlock just the ...

...INSIDE PANEL TO THE DOOR, YOU MAY BE ABLE TO PROP IT UP SOMEHOW, PERHAPS WITH A 2X4 OR A PIECE OF PLASTIC PIPE, UNTIL YOU BUY AND INSTALL THE NEW REGULATOR. I HOPE THIS HELPS. PLEASE KEEP ME POSTED, ...

...inside panel. I have a small dent on back door where I backed into a pole. I want to pop off the inside panel. how do I do that? You'll need to remove screws that are by the door handle, arm rest, ...

...inside door panel. I need to remove the inside door panel for the front seat passenger side. I have a rattle inside that stops when you hold the handle out. You'll need to remove screws that are by ...

...inside door panel off to rehook the linkage? I found only one screw for the panel and it is located next to the inside door handle lever. I really do not want to ruin the panel, is there a way to do ...