...O2 sensor on the down pipe and the one after the cat as well ,the two white wires should read 12v with the plug out and from car and with plug out they should show a continuety on the sensor itself ...
obd code p0171 idle problem O2 sensor on the drivers side after the catalytic converter is faulty.Replace it and reset the computer or remove code from computer.
...O2 sensor, the EVAP system, or a drop in catalytic efficiency, but this isn't set in stone, just the most popular scenarios. Very best regards Geordie My 2008 Kia Optima is having the same problem. ...
replacing the O2 sensor in about 30 min. Once you located the O2 sensor, disconnect the wire harness and use the O2 sensor socket to remove the sensor from the exhaust. It's like removing a spark plug
...replacing a Spark plug and you can pick up the O2 sensor at any large Auto Parts store with a can of WD 40. Just unclip the wire leads to the O2 sensor and then with a O2 sensor socket or hint close ...
replacing an O2 Sensor, the PCM RAM memory must be cleared, either by disconnecting the PCM C-1 connector or momentarily disconnecting the Battery negative terminal. The NGC learns the characteristics
...O2 sensor and transmisson was rebuilt . trans was done first and then code 300 came up. replaced O2 senser and the vehicle is running fine. also plugs were replaced. any answers? Jeep code 1129: ...
Question about Kia Amanti
...o2 sensor before the cat converter, now code says bank one( before cat.) needs replacing. are there 4? before inspection, replaced front 02 sensor, right before the cat. the sensor before the cat is ...
...replacing that particular O2 fixes the issue. A worn out O2 sensor that will need to be troubleshot and replaced by a qualified shop. why 2001 pajero io neutral light blinks while the vehicle is ...
151 questions posted
Usually answered in minutes!
293 Questions
292 Questions
43 Questions
1 Questions
0 Questions