2003 Kia Optima "camshaft" Questions

where is bank 1 o2 sensor kia optima 4 cylinder This car have a Crankshaft and camshaft sensor the crankshaft sensor is loceted in near the pulley crankshaft and the camshaft sensor is located in the ...

2015 Kia Optima. If camshaft sensor mounted improperly will if cause my engine to leak oil? I replaced camshaft sensor (P0365) I not sure I mounted it correctly! Driving home from work I smelled oil ...

...wont start at all turns over no firing sounds like timing belt It happened to me. it was a bad Camshaft-Sensor. The new sensor needs to be position with a special tool that just kia dealer has. ...

I have a P0011 "Camshaft Position/Bank 1 code. I have a P0011 "Camshaft Position/Bank 1 code. However, the car runs fine. Is this just a sensor that need to be replaced or do I have a real ...

2005 Kia Optima won't run, CodePO338? Had code PO342 for Camshaft positioning sensor. Replaced and it ran fine . Then cut of, now have code for PO 338 . error code PO 342 was on the low input. Now

can't align the timing marks on the camshaft gears on a KIA Optima 2004 2.4 litre engine, they are 1 tooth off but will not stay when moved you need a special tool that holds them in place its a weird

...major issue My 2006.5/2007 Kia Optima Please Help its throwing up a P0011 Code Meaning Advanced Camshaft Timing? I have a possible major issue My 2006.5/2007 Kia Optima 2.4l 4 cyl automatic with ...

testing neutral battery cable, crank and camshaft sensors for ground, wire connectivity, etc.? After changing my timing belt, key won't crank the engine, dash lights flicker sporadically and positive ...

...car to loose power? I went over a speed bump and car just stopped Actually, On 2006 vehicles the camshaft position sensor senses the TDC point of the number one cylinder, on its compression