where is a knock sensor located on a 2002 jaguar x type 2.5 It's most likely under the intake manifold....If it is not on the side of the block..
knocking sensor 2002 jaguar S TYPE repair and maintenence and where is located It's most likely under the intake manifold.
...valve or it should have a coolant temp sensor, replace the colant temp sensor which is usualy located on the thermostat housing or on the intake manifold and this will sove the clod start
...intake manifold for my Lincoln Ls V6 2002 Upper intake manifold bolts : 89 in.lb. Lower intake manifold bolts : 89 in.lb. Thottle body bolts :89 in.lb. Front intake manifold support nut:89 in.lb. ...
Question about Jaguar S-Type
...intake manifold, and valve covers? Thank you. Need torque specs for 2002 sienna ce van's; spark plugs, air intake manifold (upper), and the valve covers. Thank you. Spark plug torque on the 3.0L ...
...intake manifold. the intake manifold must be removed to get to it. this vehicle is known for developing a vacum leak in the elbow hose that connects to pcv valve, so ive done a few. Yes, remove the ...
...intake manifold on a 2002 toyota sienna I need to replace the rear bank VVT solenoid on a 2002 Toyota sienna. It requires taking off the intake manifold according to the dealership. How do I do that? ...
...Intake manifold bolt torque sequence 2.7L engine Upper intake manifold with a new gasket on the lower intake manifold and torque the bolts, in sequence, to: 105 inch lbs. (12 Nm) Hope helps (remember ...
...LolIt's under the intake manifold. I've done a few. Unbolt throttle body from intake. The throttle body kinda loose where it is. Remove intake manifold. You can't miss it once intake is ...
...SEVILLE STS 4.6 Hello, The starter is under the intake manifold. The intake manifold has to come off. Be careful not to damage the rubber adapter between the intake and the bracket on the
947 questions posted
Usually answered in minutes!
1,411 Questions
655 Questions
363 Questions
261 Questions
35 Questions