...transit connect just cut out, tdi 2003 a light came on . ie best way to describe the symble , a letter m joining in the middle..looks lke a spring. can u advise please The light you are describing is ...
...What is looked for is smooth voltage increase with throttle change. If there are drop outs in the transition or that there is no transition seen, the TPS is
...pre-OBDII (let's call it OBDI) you don't need a scanner. Read on.. Beginning in 1994, vehicles were transitioning from the older OBDI computer and by a 1996 - nearly all were OBDII. The nice thing ...
None of my power windows on 1998 Mercury Mountaineer work, checked fuses but can't find power relay if there is one. Any suggestions If you checked the fuses and they are fine, try this. With the key ...
...Fault Step Action Value(s) Yes No Schematic Reference: Transfer Case Control Schematics 1 Important: Check the transfer case shift control module for DTCs. The transfer case shift control module is ...
connect a fuel pressure gauge and check to see if the fuel pressure is within specifications FIRST. Then I would drive the truck with the fuel pressure gauge still hooked up to see if it is
...finding the fault is another question ,it could be anything from a faulty temperature sensor to a burnt pin connection in the multiplug feed to the fan so i would advise you to ask a local recomended ...
...Finding out which one you have is important because the PCM activates the heater under various circumstances. If the PCM detects an abnormally low voltage condition on the heater circuit, P0037 may ...
...transit relay which is fitted when the cars leave the factory.This enables the car to be started and driven and to be stored without the battery going flat,But if those 2 wires become shorted out or ...
2,009 questions posted
Usually answered in minutes!
655 Questions
621 Questions
363 Questions
261 Questions
35 Questions
