...motor, replaced waterpump, radiator, fan clutch, all sensors and a 160degree thermostat. And still the truck gets up to 200-230degrees. Need some direction to go im stuck on it. anywhere up to about ...
...FAN MOTOR. IF IT COME ON CHECK FAN RELAY + FUSE.SCAN IT TO CHECK COOLANT SENSOR.A BAD COOLANT SENSOR WILL STOP COOLANT FAN FROM RUNNING.WHEN THE ENGINE IS 195 TO 200 DEGREES. THE COOLANT SENSOR ...
...turned out the elictric fan was blowing the wrong way , make sure the air is blowing towards the motor .. itr is the relay swith for the fan...huge problem w /these models. it is under the front ...
...fan motor itself isn't drawing too much amperage either from age or a poor connection. (should always be checked otherwise changing the relay is fixing the result, not the cause of the problem) You ...
...motor is gone? How much am I looking at fixing this problem ticking can be a few problems that are not terminal first check oil if low top off and see if noise quiets down if oil good than have oil ...
...fan motor burnt up. Need to find replacement. What we are finding only have 2 wires coming out of motor, we had 3. Connecting wires have 3. What do these three wires do and where can we find the ...
...motor itself that went bad...so had to have that replaced. Now I am taking it back and the guy has no idea why it stopped working again but he said he would take a look. All in all i have already ...
...fan belt on it for $10. get a GATES or GY, Gatorback now lets delve in to why you mech is (asleep in class?) belt new, and tensioned to spec. some belts slip and do so with out a sound!, gee, get a ...
...binding or loose. Then, change it. If you are blowing the fan relay, chances are that the fan motor is drawing too much amperage and is binding when it gets hot...that will cause the relay to
2,009 questions posted
Usually answered in minutes!
655 Questions
621 Questions
363 Questions
261 Questions
35 Questions
