2000 Jaguar S-Type "change bank 2 o2" Questions

bank one code:p0420. 2. heater valve is not hot. 3. right front seat will not move. 4. left and right side mirrors will not work. change O2 sensor their cheap enough ,heater valve not sure about ,seat

Bank 2)try changing the O2 sensors the one before the cat is the first one to fail in normal circumstances ,must be an american market model this vehicle as i cannot read a europeon market vehcle here

...This indication, if by itself, would indicate a faulty MAF Sensor or a vacuum leak, but since you already have the P1151, change the Bank 2 O2 sensor first and most likely both codes will

change 02 sensor on bank 1 sensor2 I did but engine light is still on 2004 chevy tahoe code p 0136 refers to heated oxygen sensor (HO2S) 2 bank 1 ---circuit malfunction===causes ---heating inoperative

...bank 2 just means the second one, so if you start out at your exhaust manifold and inspect the piping going back, the second O2 senor you find will be the one you need to change, it will likely be ...

...change that or test the relay , videos on you tube on testing relays . MAIN Relay -- LO SPEED Relay, HI SPEED Relay, S/P FAN Relay, PRE O2 Fuse, IGN-1 Fuse, ECM Fuse, POST O2 Fuse, and INJ Fuse Also ...

...is the 2nd sensor back on that sides exhaust pipe. P0141 - Heated Oxygen Sensor (HO2S) Heater Performance Bank 1 Sensor 2 P0138 - Heated Oxygen Sensor (HO2S) Circuit High Voltage Bank 1 Sensor ...

...can't find any diagram that has a bank 2 sensor 2 only bank 2 sensor 1 just change the o2 sensor tha code its saying is irrelvant to that model cause it has a generic ECM that fits several other ...

...change. Oxygen sensors are always numbered like this: Bank 1 sensor 1 Bank 2 sensor 1 Bank 1 sensor 2 Bank 2 sensor 2 Some manufacturers use a kind of shorthand that reads different, but means the ...

...on bank 1 there is nothing wrong with the timing chain position . Just a series of sensors that have gone outside the set parameters so if you check and change each one you will clear the