2005 Infiniti G35 "unplugging camshaft sensor" Questions

Ad

Question about Infiniti G35

1 Answer

...camshaft sensor . the cam sensor is held in place by four ten mm bolts. Don't forget to put a new oil seal on the new sensor .or else you'll have oil spewing out from that side of the

Ad

...camshaft position sensor while the car was running and it did nothing. Check the pins in the cam sensor,one might be bent and not making a good connection.I am assuming you did not have a cam sensor ...

Ad

Question about Infiniti G35

1 Answer

camshaft sensor how to change a 99 gmc jimmy camshaft sensor the cam sensor for 1999 jimmy with a 4.3L is in the distributer. pull off cap and rotor then unplug cam sensor and remove. please rate this

Question about Infiniti G35

1 Answer

...sensor the camshaft sensor is on the drivers side head you just need a metric wrench and unplug sensor and unscrew old in with the new watch for oil on the sensor signaling a oil leak at the head or ...

...camshaft sensor which located on timing cover or forgot to reconnect camshaft sensor because crankshaft sensor and camshaft sensor work together to control fuel timing and spark timing.make sure ...

...camshaft sensor on a 1999 vw beetle 2.0 Courtesy of a Beetle forum.The camshaft position sensor is located at the front of the cylinder head under the timing belt cover. On 2.0L models, the camshaft ...

...Camshaft Position Sensor Guide audi a4 The camshaft position sensor is located behind timing belt cover in front of engine.Remove cover, sensor is visable in top right hand corner.Unplug, remove 2 ...

Question about Infiniti G35

1 Answer

...Camshaft Sensor I replaced the camshaft sensor (code p0340) the car still wont start. I did unplug the + on the battery. I went back to check the code and i am still getting the p0340 code change the ...

...sensor and the camshaft position sensor. For DOHC engines, unplug the electrical connector from the camshaft position sensor. For SOHC engines, remove the brake booster hose and the electrical ...

Question about Cars & Trucks

1 Answer

...problem is in the wiring harness or the object on the camshaft the sensor uses as a reference point. Unplugging the sensor makes the computer use a known good signal or value in place of the

Not finding what you are looking for?
2005 Infiniti G35 Logo

536 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...