2005 Infiniti G35 "bad crankshaft sensor code replacing" Questions

Ad

Question about Infiniti G35

1 Answer

...bad engine VQ3.5DE with one from a running Infiniti of the same engine. After replacement , replaced all Sensors, all Coil packs/ Plugs. Flywheel, Etc . Engine turns over but no spark. ( No Codes ) ...

Ad

crankshaft. The complete engine cooling system consists of a radiator, recovery system, cooling fan, thermostat, water pump and serpentine belt. Check the coolant level in the recovery bottle or surge

Ad

...it while it wasn't plugged in fully, you will throw that code. Just clear it and see if it comes back. If it reoccurs while the car is driving, then you might have a bad Crankshaft position

Question about Infiniti G35

1 Answer

...will throw a bad crankshaft sensor code when it could be one or two other problems. Rule all those out before you buy any needless parts. Auto zone is a great place to go for having your codes

Question about Infiniti G35

1 Answer

crankshaft sensor... When you say you changed a bad sensor and it had no effect on the CEL, which sensor was changed? When installing the crankshaft sensor the gap between sensor and crankshaft pulley

Question about Infiniti G35

1 Answer

...bad camshaft sensor can cause crankshaft sensor to act up and give code for the crankshaft sensor. Replaced camshaft sensor and the truck runs like a dream !!!!!! I believe the Manifold was cracked ...

bad timing set o I miss some kind of gasket between the sensor end motor to prevent ground contact code p 0335 refers to crankshaft position sensor (CKP)---circuit malfunction===causes ---wiring---CKP

...2006 nissan 2.5 liter engine so can be replaced codes said sensor was bad THE CRANKSHAFT SENSOR IS LOCATED ON THE OIL PAN. The crank shaft sensor is easiest to get at from under the truck, VERY

Question about Infiniti G35

1 Answer

...cause. Check the plug connector for corrosion or loose pins. If the problem does not go away, the wire loom may have a bad spot. The crankshaft position sensor can go bad. Please rate my

...Crankshaft sensor circuit A error code on OBD....replaced sensor with two differnt new sensors and no luck...car starts after cranking it for 30 sec. But misses out pretty bad and continually dings ...

Not finding what you are looking for?
2005 Infiniti G35 Logo

536 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...