2006 Hyundai Tucson "wiper motor burn fuse" Questions

2006 Tucson whipers will not move #1 check for burned out fuses. #2 check the wiring going to the motor and switch assembly. #3 check the wiper motor itself.

...wiper motor might be failing which causes too much amperes required to turn the motor which in turn trips the maximum rated amperes of the fuse. Follow the wiring of that fuse to your wiper motor to ...

...I would get a simple dc power tester and see if the windshield wiper motor is getting power. If you don't have a bad fuse and the motor is still getting power I would say the motor has burned

wiper motor? Problem with short in the Line? What should I do next? First of all disconnect the motor before you change the fuse and then try it out. If the fuse blows out hten you have a fault in the

...wiper motor. You can possibly just replace the circuit board or replace the whole wiper motor. Good Luck, Israel Adame check the wiper relay , if the relay has shorted then the fuse will blow all the ...

...wiper motor out. The motor isn't made to clear snow from the windshield in any great amount so the harder it has to work to move the more chance you'll have of burning it out. Did you check the fuses ...

wiper motor wont run They were frozen switch was on. Fuse is ok. Nothing happens motor burned up, but it should have blown the fuse, i suggest unsticking your wipers, rechecking your fuses, check for ...

...wiper of my car a 1997 Saab 900 SE turbo 2.0L. Burn the fuse. I change the motor today and when I put the fuse in it burn again. I don't know where to look to find the problem. I can drive the car ...

...wiper motor and use a volt meter to check for voltage between the wires that plug into the motor. Be sure to check for voltage with the wiper motor switch turned on. If you have power then you have ...

...wiper motor what else could be going on? Check your wipers are parking in correct position -if there has been slippage at their attachment spigot they may be jamming the motor during use causing fuse ...