2006 Hyundai Tucson "brake light switch 2005 kia" Questions

my 2005 Kia Sportage which is built on the same platform. I have order a new brake switch for the vehicle and I will install it on arrival. Mechanic said it sounds like a faulty switch. Bulbs are fine

...brake light stay on My car has been to the shop for this reason before, all they did was fix the brake light, but after a week the break light switch is stuck again, and I don't know weather to go ...

brake light not working on Kia 2005 Optima tali lights work, bulbs replaced brake light switch replaced but still no brake lights Check the space gap between the brake lever to the brake switch. Also ...

...on when brakes are released Most vehicles use a button type switch which the brake pedal arm compresses the button with foot off pedal.most likely switch is failed or out of adjustment.easy to

...brake light switch on the brake pedal. It may need adjusting to allow brake lights to go off. The plunger on the switch needs to open when pedal is depressed, and close when pedal is released and in ...

Brake lamp switch is normally the culprit of this problem, it is located on the brake pedal assembly itself. MIKE your fluid is probably low, it may have a leak somewhere, alot of kia spectras seem to

brake light seems to have an electrical short the brakes lights flicker on and off daily. This would be due to a faulty brake light switch. the switch is located above the brake pedal and is actuated ...

...my key in the spot beside the park console and it unlocked my car but would not let me put my car in park..thank you BRAKE LIGHT SWITCH FAULTY OR TRANSMISSION  NEUTRAL SAFETY SWITCH COULD BE

...brake light switch is bad, or, your brake pedal return spring isn't pulling the pedal back towards the seat. First, just pull up on the brake pedal, opposite direction of when you are applying them ...

...brake light works fine I changed the tail light and stop fuses already, both light stopped working at the same time. have u ck out the brake switch on the brake peddle arm to see if the plungers is ...