2006 Hyundai Santa Fe "ball joint lower remove" Questions

Ad

Question about Hyundai Santa Fe

1 Answer

...ball joint 2002 hyundi santa fe Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones pressed ...

Ad

...ball joint. will i damage seal? I am replacing axle but not ball joint. I will use ball joint removal tool That's the right way and only way to do this, just put some lube on the fork side, that will ...

Ad

Question about Hyundai Santa Fe

2 Answers

...ball joint on the control arm.  Seems easiest solution is replace the entire lower control arm assembly -has only 4 bolts to remove/loosen and this replaces all the bushing on the arm ...

Question about Hyundai Santa Fe

1 Answer

ball joint removal how to I would like to know how to remove lower ball joints from 2002 chev trailblazer step by step Remove the steering knuckle with wheel hub and bearing attached. Remove the lower

...ball joint ? Removal & Installation NOTE This procedure requires the use of the following special tools: J 9519-E Lower Ball Joint Remover and Installer, J 34874 Booster Seal Remover/Installer, J ...

Question about Hyundai Santa Fe

1 Answer

...ball joint on 2004 mercury mountaineer? Remove the brake caliper by removing the two bolts that connect it to the steering knuckle. Remove the lower ball joint cotter pin and retaining nut. Pry the ...

Question about Hyundai Santa Fe

2 Answers

...ball joint nut. Separate the lower arm from the ball joint. Once the knuckle assembly is off the car remove the lower joint snap ring and dust boot. Utilizing a ball joint press (should be able to ...

ball joint on a 1988 pontiac grand prix hit a pothole and it popped out Hope this helps and please don't forget to rate! Thank you! Front ball joint with heat shield Remove and Replace- Disconnect the

Question about Hyundai Santa Fe

1 Answer

...Ball Joint Replacement Removal ProcedureTools RequiredJ 43828 Ball Joint Separator Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.Remove the ...

Question about Hyundai Santa Fe

1 Answer

...ball joint is pressed into the lower control arm. You will need a ball joint press to remove and install the ball joint. The other option is to replace the lower control arm. Some parts store will ...

Not finding what you are looking for?
2006 Hyundai Santa Fe Logo

392 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...