2005 Hyundai Tucson "crankshaft turn freely car" Questions

...and the crankshaft will not turn freely. Is the bearing too thick?. Should i get the STD? please advise. Thanks Sounds like you have the wrong bearings. You need to order the same size you took

which does not spin freely because it is attached to the pistons inside the engine. To turn the pulleys, you have to turn the crankshaft, which in turn moves the pistons inside the engine up and down

...turn freely and crankshaft pulley not. (engine off) I have seen on rare occassions that all the pulleys turn free and when you start it it breaks the belt. On some they were the alternator was ...

...crankshaft suppose to be stiff or should it be able to turn freely on my 2002 ford taurus? It will not turn freely, but should turn with a socket on the crank shaft end bolt & using a two foot ...

...crankshaft spinning freely, is this normal? Just replaced a/c compressor and the pulley is turning real slow. Belt is not slipping. The crankshaft pulley and a/c pulley/belt rotate normally when a/c ...

...TURN THE KEY FUEL PUMP BAD,? Sounds like the starter is bad, many parts stores can test the starter itself. The solenoid is working, but the starter isn't spinning. Also check to see if the motor ...

...crankshaft pulley bolt and check that engine still turns freely. If the engine is seized, you know what that means-the terrible knocking was a main or rod bearing being bad, and seized up on the ...

...does not turn freely (except crankshaft pulley) is where you will find your problem Sounds like you need to replace what is locked up. Take the belt off and turn all the pulleys. One is not

...against something, motor turn freely by hand, plenty of battery. automatic --indicates that the ring gear is out of round --indicates that the flexplate has cracked off the crankshaft mounting ...

...you to unblot the torque converter? The drive plate is bolted to the crankshaft, the torque converter is bolted to the drive plate, it should turn with the engine only. Hope this helps, let me ...