...clutch pedal for you. Take care with the brake fluid, as it removes paintwork ! Top up your clutch fluid reservoir, connect a bleeding tube to the nipple on your slave cylinder, and put the other end ...
clutch pedal is very heavy to push down my Hyundai tucsons clutch is very heavy and have to push right down to the floor to engage gear If the clutch in your car is hydralic there is no way to adjust ...
...clutch and in neutral before the circuit is complete to allow the engine to start. So you will need pressure in the clutch system (Foot on the clutch pedal) and the selector in neutral to
...clutch pedal. This sound is like a BZZZZZZ sound. I took it to a mechanic and he said maybe it's because of some water that got into due to the wash of my car. So he put some bribe in the joint stop ...
...clutch all the way, this is the reason for the low bite pedal and hard to get gears, the most common problem is the fluid is low due to a leaking slave cylinder, i would look around the clutch ...
...to pull hard. Hyundai Tucson 2 litre crdi check your clutch pedal for free play it should be 3/4" it might be adjusted up to much, you might have to adjust it off a little....hope this ...
...no air in the clutch fluid.Bleed the system.If that does not cure the problem then if you have good pressure at the pedal you pressure plate is faulty.Then the only solution is to replace the
...clutch pedal with your foot). Trying to work on this type of clutch system can sometimes be a very hard to do. With the small amount of miles your car has on it, I would get the dealer involved in ...
squeak on clutch pedal fitted as standard.....spray with silicon.
...clutch pedal,. I got a mate to fit a new master cylynder (1hour work), and that seemed to resolve the problem.... but only for several weeks....! eventually i was unable to find most gears on ...
992 questions posted
Usually answered in minutes!
538 Questions
117 Questions
101 Questions
76 Questions
67 Questions
