2002 Hyundai Accent "removing wheel studs" Questions

...studs off the same rotor, this happened about a year ago to me on the opposite tire, but I actually forget if I have to take off the entire caliper assembly or if I can get away with just taking off ...

...wheel. Check the studs to see if it has any retaining rings on them. If they do, pry them off with a small screwdriver. Now take a hammer and bang the drum to loosen it off the axel flange and pull ...

...wheel well. Hit it hard, rotate the wheel a quarter turn and hit it again. use a hammer and hit the rotors as hard as you can without hitting the studs.. they will come off i like to use a 3lb. ...

wheel stud is broken need to fix it The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course. Take of wheel, Next remove out old stud

back off and wreck new stud. 6. if you dont have air gun or feel comfertable removing brakes bring it to a reputable garage, shouldnt cost more than $70+ parts to get all new studs put in on one wheel

trying to remove wheel stud rear do I have to remove disc if so do I remove large nut remove the brake caliper and rotor to access the hub. now to remove bad wheel stud. knock old stud out with a ...

...removing the wheel hub. (Saturn Ion 05) Currently I'm having issues removing the stuck wheel hub. What was recommended to me was to just remove the wheel hub enough to gain some clearance to remove ...

...removing wheel lug studs. there should be one spot while turning rear wheel bearing that will allow one stud to be knocked out and new stud replaced BEFORE trying to remove the next stud... one at a ...

broken rear wheel stud on a 2005 ford focus zx4 se broken rear wheel stud Step 1Buy a new stud. Make sure you purchase the right size. If you're not sure what size to get, wait until you remove the ...

...wheel studs, I was able to get the broken stud off the wheel hub, but I can't install the new stud. There is a shroud behind the wheel hub that doesn't allow enough room to push the longer new stud ...