2002 Hyundai Accent "car radio warm touch" Questions

radio on until the car warms up if you can remove the knob on the radio spray a light amount of WD 40 and then put the knob back on and turn it back and forth and if you have pop on your hand or water

...car and traced the problem to the radio. When I removed the radio I discovered it quite warm to the touch in spite of it having been switched off for hours. The Sony website told me that radio should ...

...radio I would suggest checking the fuse For the overheating the most common reason is the thermostat in the cooling system. They wear out over time and sometimes get stuck in the closed position. The ...

car for half hour so it learn shiftting stop idle then turn heat on off turn radio on off should be ok after 100 miles even better as time goes by driving. because relearn the shifting idling ok later

Radio takes ages to 'warm up' The car stereo can take up to half an hour to come on, after starting the engine. In the meantime, each time I accelerate, I can hear the same noise that you might expect

...questions leave them in add comments and I will check back. KL Turn on the headlights, and radio to 109.7, then open the heater door and shove a pice of wood on the fire, it should warm up

...radio, no ignition. Nothing. The car is a 1996 Toyyota Corolla. You damaged battery cables - replace both and check for burnt fusible links. Hopefully it's just your cables. did you place the cables ...

...car and their was no power whatsoever. An hour later it started up just fine, although the radio was asking for the reset code. The only other time it asked for that code was when my transmission was ...

warm..Please advise if possible with details on identifying directional door and it's location. Thank you LG . SCOTT LG, first you need to make sure coolant is circulating through the heater core. let

...radio and ac knobs felt unusually warm to the touch. any ideas? Thanks!!!!! Check your alternator, sometimes they will do some wierd things, and make some wierd noises if the bearing is going out. ...