1995 Geo Tracker "cam shaft sensor going bad" Questions

...cam shaft sensor is unplugged i have check the timing over and over, replaced the cam sensor and crank sensor, replace the wiring harness and check the cam shaft magnet! And i have checked the cam ...

...cam shaft issue with a 2011 Chevy hhr cause the car to cut off if not fixed? Not usually. Cam sensor is for injector firing. When they go bad the PCM goes to default mode. (Last known sequence) Then ...

...cam shaft end play with bad cam sensor I've had a cam shaft sensor go out every year for about three years. Read that the cam shaft end play may increase failure if it's over .013 So, is it ...

...cam shaft sensor and crank shaft sensor have not gone bad yet i would have them checked. usually these go bad really quick on jeeps. just had to replace both my cam and crank sensors and with out ...

cam shaft sensor on the 1999 mercury village the distributor. repalce entire distributor. buy on ebay for 200. 1999 known for bad dist bearing takes out cam sensor. go here for more help http://groups

...350 i replaced coil,cam shaft sensor,crank shaft sensor,and control module for the coil and the coil still wont fire but the plug going to the coil has fire to it..what else is left to change Bad ...

...cam sensor is integrated with the crank shaft sensor behind the crank shaft pulley. The 3.1 runs 2 crank sensors. the one behind the crankshaft pulley in integrated to act as a cam sensor. It has 2 ...

...shaft cam sensor is bad. i have a 1999 chrysler 300m. while driving the car shuts down and won't turn over soon after. i took it to auto zone and had it tested and the machine read shaft cam position ...

...Cam Shaft Sensor 3 times this year. Could there be something wrong with something else making the cam shaft sensor go bad? I just replaced the CSS oh maybe 2 weeks ago and it is already acting like ...

wont start would be starting good go back to start and it wont Cam shaft sensor going bad