1994 Geo Tracker "replacing valve cover gasket 3" Questions

...valve cover Fig. Fig. 7: Unfasten the rear cable support bracket bolt and set the cable and bracket aside Fig. Fig. 8: Unscrew the crankcase vent valve retainer ... Fig. Fig. 9: ... and pull the pipe ...

valve cover were not tight. I would like to know if anyone nhas idea how they became loose and what they should be torqued to when retighting them most valve covers screws are loose. they use very low

...valve cover gasket plugs not firing all the time could oil have damaged cencer on end of cam shaft how can I test it Check or replace coil pack, and replace spark plugs. Also check if fuel pump is ...

...valve cover gasket set.
if not it will fAIL, it will,like pissn on a sparkplug
bam. like texas talk, i do...sorry

and a cam belt.. forgot that too?
that is fail 2 , in the woods, ...

valve cover gasket, can leak in many odd ways, making most owners think its something else. 9: head bolts loose for sure left front bolt causing block to head gallery port to leak left front of engine

...valve cover gasket the valve cover gasket should be simple enough. 1. Locate the valve cover, and clear the way for it to come out. 2. Loosen the valve cover bolts in an even fashion. 3. clean and ...

...valve cover gasket? To replace the valve cover gasket, you have to: 1) Remove spark plug wires 2) Remove spark plugs 3) Remove ground cable, and all pcv lines and hoses 4) remove 4,10mm nuts holding ...

...valve cover gaskets on a 2000 frontier v 6 how to replace valve cover gaskets on a 2000 frontier v 6 truck torque specs for the rocker cover (valve cover) screws: 9 - 26 inch lbs step one- 9 in lbs ...

...valve cover gasket on 01 pt cruiser how to replace valve cover gasket on 01 pt cruiser 2.0 end no tubo This procedure takes approx 3 hours.You have to remove upper intake manifold and cylinder head ...

valve cover gasket on a 2002 ford ranger Hi diane hensle. I hope I can help with your problem. First, you want to remove the PCV valve hose and any other hoses that may be running to your valve cover.