1994 Geo Tracker "distributor" Questions

...double check that all your timing marks are correct with the #1 cylinder at tdc. make sure that the distributor iscorrect also.check that the rotoris at the #1 wire when your at tdc. If everything is ...

...like it's running on one or two cylinders instead of all four. However, if it's a vacuum advance distributor, the hose may be lose. Look for a connection to either wires or a vacuum {rubber line} ...

i took the distributor out of my 1990 tracker and didnt mark where it goes back in how can i find out Take off valve cover to reveal number one cylinder rocker arms. Rotate crank until you see ...

How do you know when the distributor fails completely or when it could be just the rotor? the rotor wiull have an emmense carbon build up on the contact to the distributor end of it. check the cap as ...

...1 8 at 800 rpm Set the cam mark on E at top. Set crank at 12 o'clock place belt on crank an cam. Distributor should be firing on #4 plug.if removed set rotor to #4 install distributor. It will ...

...light and a test buddy. If you have a carburetor then you have points. Clean the points in the distributor and set them back to specification at TDC cylinder one. Look at the orientation of the ...

...I had checked the fuses none was blown in any spot. I checked the coil was not it. I tried the distributor was not it. I sprayed some starting fluid in the throttle body still did not want to ...

set distributor set distributor old post set? time it? or install it set means zero to me...(tell the story first?) no matter all http://www.fixkick.com/IGN_timing/16v-procedure.html

how does the distributor come off of a 2000 Chevy Tracker My info says you don't have a distributor. It shows coil on plug ignition. Just to add, my database only has info on vehicles sold in the ...

...quit and wont run. I had a new fuel pump put on year before last and new plugs and wires and a distributor cap put on last year. What could the problem be? check coil / distributor / ...