1993 Geo Prizm "pivot driver battery" Questions

...with no books.? 1: pull neg, battery lug, first and only. 2: pull all wires off Alt. 3: loosen all pivots bolts, (can be 3 ) 4: drop the belt. 5: pull off all bolts on alt. 6: alt falls out. tools?, ...

BATTERY PLUS TERMINAL NUT AND WIRE REMOVE.PIVOT BOLT SPACER CAREFUL DONT DROP LOSE SPACER. THEN REMOVE ALTERNATOR. YOU NEED BELT TENSION GAUGE TORQUE ADJUSTING T BOLT UNTIL TENSION GAUGE READS 120 LBS

...battery negative cable. Disconnect and label the wiring harness connections to the alternator (Painters Masking tape works very well for labeling Automotive wiring). Loosen the alternator pivot bolt. ...

...battery) you may need a small flat head screw driver to help to split it apart Sir, Click this link and go through the site. Link 2 Thanks Good Luck Appreciate to rate as "Fixya" replace the ...

...driver side). Using a 12mm socket loosen the tension adjusting screw and bracket screw. Using a 10mm socket or open end remove wirings. Pinched other connector to remove. Using 14mm socket with 3/8 ...

...pivot shaft. Remove the cowl vent screws and disconnect the washer hoses from the washer jets. Detach the electrical connectors from the wiper motor. Remove the wiper assembly attaching screws, lift ...

...pivot on each end and mounts to a shaft that holds these two inner pivots. 1. Disconnect and isolate the battery negative cable. 2. Remove the wiper arms. 3. Disconnect the washer hose at the in-line ...

...driver side seat to replace the battery underneath it? you have to remove the lower coverpanel just below the front of the seat . it releases with 2 clips. than you can unbolt the 2 front mount bolts ...

...PIVOT BOLT CAREFUL NOT TO LOSE THE SPACER.REMOVE THE ALTERNATOR. NOW THE 3.2L AND 3.5L ENGINES REMOVE THE NEGATIVE BATTERY CABLE.THEN REMOVE THE LOWER MOUNTING BOLT AND PIVIT BOLT.REMOVE DRIVE ...

...battery terminals so the wipers don't accidently come on. Check you must have a pivot arm that came off. Check to see if it's damaged and what part you'll need. The linkage can be removed with the ...