1992 Geo Prizm "change front oil seal camshaft" Questions

Ad

...change a timing cover seal on a 1992 Geo Prizm? Car is leaking oil bad out front of engine, I assume it is the timing cover seals. This is the same as a Toyota Corolla. Plan on replacing the timing ...

Ad

Question about Geo Prizm

1 Answer

change CAmshaft seal on 96 Hyundai Accent SOHC 1.Install the camshaft after lubricating the journal of the camshaft with engine oil. 2.Install the camshaft bearing caps. 3.Install the ignition coil. 4

Ad

...oil does any aries need. the front crank shaft seal and the front camshaft seal can be changed with the engine in the car, but to replace the rear crankshaft seal you have to remove the engine. the ...

...of transaxle housing) - oil filter bracket to block o-ring seal (drips on front bank exhaust) - crankshaft nose oil seal (have done with timing belt change) - rear main seal (expensive, leave it

...front of the engine, remove time belt, remove crankshaft sprocket, I warn you in these engines often is the oil leak by the seal of the oil pump, so I recommend you change the seal the pump and the ...

...front left wheel..was told by a friend that the problem could either be a camshaft seal or crankshaft seal...if is either of these is it possible to change these on my own? (with normal tools e.g ...

...front.. Remove electrical connector. Fixing bolt is underneath sensor. Warning - on removal some oil will escape. I changed the oil in my Kia Picanto 1.1 auto transmission, I removed the transmission ...

...front engine mount . Set #1 piston at TDC, Loosen tensioner w/ spring slip off belt. **Remove sprocket pull out old seal with a sharp pick. Greese and install new seal make sure its flush with its ...

...oil pan. About 4" diameter. The are assuming it is part of the crankshaft bearing or seal. Can these parts be replaced or is it time for a new enging? The car has about 60,000, which to me seems like ...

Question about Geo Prizm

1 Answer

...front crankshaft oil seal or camshaft seal. Both of these require removal of the cam belt assembly if you have the CVH engine ( if you have a large silver top cover on the engine ) or if you have a ...

Not finding what you are looking for?
1992 Geo Prizm Logo

121 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Geo Prizm
1995 Geo Prizm

421 Questions

1996 Geo Prizm
1996 Geo Prizm

286 Questions

1994 Geo Prizm
1994 Geo Prizm

276 Questions

1993 Geo Prizm
1993 Geo Prizm

205 Questions

1990 Geo Prizm
1990 Geo Prizm

189 Questions

Top Geo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...