2006 Kia Sedona "replace rings oil filter housing" Questions

...replace oil/filter) well like Vlad I could guess as well, first clean off all oil from where you think it could be coming from, that's all around the filter. Start the engine and watch for the leak, ...

...oil. The ONLY way to fix this is to replace the receiver/drier, FLUSH the ENTIRE SYSTEM out, remove the compressor and drain the oil out of it, and put the whole thing back together again with the ...

...replace the expansion valve. The high pressure was way to 130-275 and the high side hose was very hot while the mechanic was charging the system and the low side was high at 130 and would not drop ...

...oil, replace filter housing, replace oil drain plug, pour new oil in at top of engine oil cap, replace dip stick, start engine, run for 45 seconds, turn off, check dip stick to make sure oil is at ...

...and i have done the bolts up tight as scared they are going to snap? Replace the oil ring on the oil filter or get another oil filter.. B4 screw in the oil filter apply some oil to the oil

...rings. The drain plug is used to drain residual oil from the filter unit prior to removing the plastic screw-in housing. After removing the large, metal, round screw with a 1/2" square fitting in the ...

...Replace the Oil filter if needed. When you replace with a new oil filter, you must put a light coat of clean oil all over the o-ring gasket of the filter and hand tighten only. Let me know if this ...

...oil filter is that the o-ring from the old filter stuck to the block during removal and when the new filter is put on you have two o-rings stacked on top of each other. This will cause a leak. Take ...

...oil that leaks out. Pull the filter element out of the cartridge housing. Put the new filter element into the housing, remove the old O-ring on the filter housing, replace the O-ring on the filter ...

...Seal" Check this website for a picture. take the oil filter off,the fitting that the oil filter screws on take that out your housing will then come off the oil cooler so you can replace the o ...