2006 Hyundai Sonata "stop wiper arm linkage coming" Questions

How do you replace a windshield wiper motor on a Hyundai 2002 SG350L? One of my wipers just stopped moving? Remove the wiper arms and lower windscreen cover. Check the wiper motor linkages first ...

...it's likely one of the bolts has come loose. Both wiper arms are linked to one wiper motor. the linkage for the wiper arms are for a pressed on fit. you need a new linkage it its sloppy as you ...

...wiper arms move free if so the linkage assembly has come apart you have to take the plastic part under the windshield off along with the wipers arms to have access to the linkagage ,if the arms ar ...

...wiper linkage has come off the wiper motor. To reconnect the linkage, first remove the wiped arms, the remove the wiped cowl. The wiper cowl bolts are located under the hood and screws through the ...

...wiper arm may have come loose from the motor linkage , where the arm joins the linkage outside of bonnet/hood there is a flip up cap , under there is a nut that holds the wiper arm in position , this ...

Wiper Linkage There was some snow and ice on my windshield, I turned the wipers on and my driver's side wiper stopped working. The passenger side worked no problem. So, I took apart the wiper area and

...wiper arm on the passenger side stopped wiping. Someone told me that a small screw on the end of it probably needs tightening but I can't find it. Can you help me ? Hello! Is the cap nut that holds ...

...stop look at where it is touching this area should have a 4mm gap the wiper motor has to be in the intermittent position prior to this turn key on put wipers in intermittent let motor spin then when ...

...wipers stopped working, can hear motor but arms not working the wiper motor linkage is broken you will need a new one. this is a common problem. tighten the nuts up on the wiper arms they come ...

...wiper arm has come loose One motor with a linkage. So could be one of 2 things. 1. Arm not tight enough on spindle, remove Black cap to expose the nut and tighten 2. Lingage failled, remove scuttle ...