high level' brake light? if so, and all three do not operate then it is most likely a brake light switch or a fuse. switches are prone to failure. I had the same problem. My blinkers would work, along
...high level lamp works proves that the brake lights switch works. That means it must be a wiring fault, most likely a connector which has come apart (partially or fully) or which has corrosion on the ...
high, I let off the gas and it goes into third. When it has been driven for a long time the problem isnt so severe. Also, not sure if it is related, but when going into reverse you have to let it idle
Question about Hyundai Sonata
...high rpms if the belt is bad/loose then the output will be low and the battery may be not good enough to supply the power to run the engine properly. When an engine reaches maximum revolution under ...
...high transmission fluid level or wrong transmission fluid type - a person I know added gear oil into the automatic transmission... guess, what happen? - the transmission died after 40 minutes of ...
...high. Now you are ready to bleed the valve in the heater hose. Once all valves have been bled until no air comes out and you get a good steady stream of coolant with the engine running make sure all ...
...high. Now you are ready to bleed the valve in the heater hose. Once all valves have been bled until no air comes out and you get a good steady stream of coolant with the engine running make sure all ...
level in the brake master cylinder, check all the fuses and also check to see if the third brake light ( center high mounted ) is working. if all is good then you need to get your car to a shop to see
1,958 questions posted
Usually answered in minutes!
680 Questions
651 Questions
474 Questions
436 Questions
337 Questions
