torque settings for kia sedona 1999 turbo diesel 2.9 cylinder head used bolts stage 1 20nm stage 2 40nm stage 3 60nm stage 4 80nm Call your local autoparts store, they have the setting for the torque.
head torque and rocker arm torque is for a 1998 6.5 L GM turbo diesel. Cylinder head bolts are done in 3 steps. Step 1 - 20 ft.-lbs Step 2 - 50 ft.-lbs Step 3: Tighten an additional 90 degrees. Lifter
Question about Nissan Cars & Trucks
...head torque settings on a nissan cabstar diesel 2010 Sequence and torque settings Head Torque settings (Don't need to renew bolts) Stage 1, Tighten 39-44 Nm Stage 2, Tighten 54-59 Nm Stage 3, Tighten ...
Question about Ford Cars & Trucks
...head bolts? not 2.5 diesel The torque sequence and specifications for the cylinder head bolts on a 1998 Ford Ranger 2.5L gasoline engine are as follows: Tighten all bolts in the sequence shown below ...
Question about Cars & Trucks
...head torque and sequence torque sequence is like a clock 9 3, 2 10 ,8 4 ,11 1 ,5 7 hope this helps. keep in mind it is best to torque it twice first time at 50 lbs the 2nd time at full torque. check ...
...torque specs for a 1993 6.5 diesel in a gmc truck. I need it for the head bolts and the rail above the valve springs The head bolts are done in 3 stages: first stage is 20 ft.lbs, second stage is 50 ...
HEAD BOLT? 2-TORQE FOR CON ROD BEARING BOLT? 3-TORQE FOR MAIN BEARING BOLT? Torque Settings Mains = 108NM Big Ends = 54NM + 90° +90° Flywheel = 122.5NM Cylinder Head = 78 NM + 90° + 90&
Question about Kia Sedona
...head torque bolt settings ten bolts I have asked several times and getting nowhere Use new bolts! Tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to ...
...head No. 1 bolt threads. Step 2: Tighten the cylinder head No. 1 bolts to 15 ft. lbs. (20 Nm), evenly and gradually, in sequence.NOTE Use a 12-point socket wrench to tighten the cylinder head No. 1 ...
...torque sequence on the heads please If it's a 6 or its a V-8 it does not matter as long as you start from the center and work your way out to both ends I will do it by numbers using an example of 10 ...
1,191 questions posted
Usually answered in minutes!
1,065 Questions
1,036 Questions
969 Questions
468 Questions
212 Questions
