2005 Hyundai Elantra "upper water outlet housing" Questions

Ad

...upper radiator hose connection from the thermostat housing.Loosen the housing bolts and remove the housing.Remove the gasket and scrape it carefully from the surface of the housing and the mounting ...

Ad

Question about Hyundai Elantra

1 Answer

...upper radiator hose from the water outlet Fig. 3: Remove the three retaining bolts for the water outlet Fig. 4: Carefully separate the water outlet from the thermostat housing Fig. 5: Remove the ...

Ad

Question about Hyundai Elantra

1 Answer

...water outlet" to refer to the upper portion, the lid if you will, of the thermostat housing. This is the part that the upper radiator hose connects to. It looks like this: Most times shops and parts ...

...UPPER RADIATOR HOSE Drivers side of engine BEHIND Top ENGINE Torque Mount Thermostat Replacement Tools Required J 38185 Hose Clamp Pliers Removal Procedure Remove the fuel injector sight shield. ...

Question about Hyundai Elantra

1 Answer

...upper radiator hose (8260) from water outlet connection. Remove two retaining bolts. Remove water outlet connection and water thermostat (8575) as an assembly. Discard gasket. Clean sealing surfaces ...

Question about Hyundai Elantra

1 Answer

...upper radiator hose and remove the water outlet connection bolts and lift water outlet clear of engine. remove thermostat by rotating it counterclockwise in the water outlet connection until the ...

Question about Hyundai Elantra

2 Answers

...upper radiator hose from the water outlet. Fig. 1: Unfasten the hose clamp, then disconnect the radiator hose from the water outlet If necessary, detach the electrical connections from the throttle ...

Question about Hyundai Elantra

2 Answers

...water outlet housing. ECT sensor electrical connector. Right upper engine mount strut bracket. Generator brace bracket bolts. Generator brace bracket. Lower intake manifold bolts. Lower intake ...

...upper motor{water in oil}. removed water outlet housing and broke bolt head off while reassembling it. now i have to replace intake manifold. it is 318 fuel injected intake. Did the bolt break off ...

...water outlet and upper radiator hose. On GA16i engines, connect the water temperature switch connector to the thermostat housing. Fill the cooling system and connect the negative (-) battery cable. ...

Not finding what you are looking for?
2005 Hyundai Elantra Logo

783 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...