...remove the spring compressor. Place the strut assembly back into the vehicle. You have struts in the front and rear of your vehicle. Typically they are recommended to be replaced around 60,000 - ...
...Remove the front wheel and tire from front hub. Remove the split pin, then remove castle nut and washer from the front hub while applying the brake. Remove the caliper mounting bolts, and hang the ...
...front hub and bearing With the car on ground, break loose the drive-axle nut, and the wheel nuts , than jack up the car, support it properly, remove the wheel ,remove the axle-nut. Remove the brake ...
...remove and replace front left axle on a 2000 hyundai elantra 1 remove the tire 2 remove the nut off the axle in the center of the hub 3 remove the two nut and bolts that hold the strut to the spindle ...
Remove the front brake assembly from the knuckle and hang it with a coat hanger or bungee strap DO NOT let it hang from the brake hoes as that may damage it. You don't have to remove the brake hose. 6
...Remove the front wheel and tire assembly. CAUTION: To avoid damage to the 6mm drive hole in the front stabilizer bar link ball stud, do not use an Allen wrench to break loose or tighten to final ...
...front strut spring enough to remove the nut on the strut. Very dangerous without the tool. Must use the spring compressor to service the strut assembly, or get a loaded strut/spring assembly to ...
...Remove the front wheel and use blocks or a jack stand to support the wheel assembly so it will not drop when the strut is removed. Remove the four top nuts of the strut located under the hood. Remove ...
REMOVE**** FRONT SHOCKS, FIRST OF ALL.SUPPORT THE LOWER CONTROL ARM WITH A JACK,REMOVE FRONT WHEEL, REMOVE BRAKE HOSE AND ABS SENSOR HARNESS TO THE STRUT BOLTS OR CLIPS,REMOVE ACTUATOR FROM TOP OF THE
783 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
443 Questions