2000 Saturn SL "wipers run stop middle windshield" Questions

...wipers in my car suddenly began parking in the middle of the windshield instead of at the bottom. Does anyone know how to fix this? Thanks! try a new relay I had the same problem in my LW200. As the ...

...Wipers now stop in middle of windshield every time you turn them off. Stops in middle on intermittent also. Take linkage loose and run wiper motor one turn. You've got the motor and linkage "out of ...

...stop in the middle of the windshield. when the car is off, if I push the wipers down. when I turn the car on... they pop back up to the middle of the windshield again. it seems to me that the wipers ...

...wipers stopped working in the middle of a snowstorm. Completely fine one minute, then both stopped in the middle of my windshield. I can hear the motor running still but zero signs of movement. ...

Wipers don't work on intermittent. They run but stop in they middle of the windshield and don't go to the bottom like normal, Then they run again and stop some other spot. When put on continuous they ...

...wipers are running intermittently and only in a very slow speed. It is getting progressively worse and they often stop in the middle of the windshield and if I wait a few minutes I am able to pulse ...

...RUN position. Turn the wiper switch to OFF. Disconnect the wiper/washer switch connector. Do the wipers park? YES - Go to Step 7 NO - Go to Step 4 4 At the wiper/washer switch connector, measure the ...

wipers delay wont work properly. turn them on and the wiper just keep going at normal speed with no delay. turn them off and the keep running then stop in the middle of windshield. The wiper module is

run at low continuous, then at the appropriate delay setting. I almost always have a problem turning them off. Sometimes the wipers will stop immediately where ever they are in the cycle (i.e., in the

...run fine but i cannot get the arms to line up to properly cover the windshield. Actually they wipe ok but stop in the middle of the windshield. You haven't got the arms lined up properly. Remove the ...