remove the block from behind the ignition switch and hot wire from there as I think it is this that's the fault. A common problem on Vw's you twist the key all the way but the starter connection doesn
...You'll need to remove the round "VW" cap on the end of the transmission. I would need to see the pilot bushing to know for sure. It could be the starter bushing or the clutch pushrod
VW makes a tool to remove it, which is about impossible to find. I have heard of taking a tap and tapping some threads into the bushing and then screwing a bolt into it and trying to pull it out. dont
...starter in my 96 vw gti wasn't working, so I replaced it, but come to find out it wasn't the starter, it was the copper bushing, it wasn't allowing the starter to spin properly, so I replaced that. ...
...Remove the Malfunctioning Starter Park your VW Jetta on a level surface, activate the emergency brake and place blocks behind the back tires for safety. Disconnect the negative battery cable with a ...
...night multiple times. This morning, started fine. Behing the ignition barel you have contact plate with plug.Change it.There is special tools to remove the wheel sreering column bush.Go to VW
...VW Jetta TDI...about every 3rd time I start the car, there is this banshee like wailing-grinding sound that lasts a second. It definately comes from under the hood, I think closer to the windshield ...
...remove the old bushing from the transmission and then install the new bushing and new starter. The bushing is 11mm interior c. How do I get the old bushing out? And the new bushing in? I have removed ...
...VW Passat V6,how do you get the the alternator off of the car. There seems to be no room to get it out NOTEOn A1 and A2 platform vehicles equipped with 010 automatic transaxle, access to the starter ...
1,795 questions posted
Usually answered in minutes!
953 Questions
963 Questions
862 Questions
606 Questions
85 Questions