1999 Saturn SL "input shaft nut" Questions

transmission shift rough if it shifts hard into all gears it leads to a bad line pressure solenoid if only into 2nd and 3rd a loose input shaft nut if slams into reverse a bad valve body

...input shaft nut. Eventually this nut will get so loose that you lose reverse completely. The transmission itself is fine and does not need replacement. $1,600-$2,200 is probably not even what the car ...

...shaft nut is 21001680. Another common slow or no reverse condition is a faulty or defective vehicle speed sensor. The input from the VSS to the PCM should always read less than 5 mph. This allows the ...

...input/output shaft nut is loose.  Buy a new nut and change the oil.  If you're pretty good you can have this done in less than a day.  Need to support engine, disconnect steering ...

...will crack sooner or later. mine did any way! yeah the input shaft nut comes loose and thats for 2nd and reverse and eventually youll have no reverse and 2nd gear then it will explode,if not ...

like second, you will have to replace and torque the input shaft nut. The guys at SaturnFans are a great group and will walk you through if you have any probems after doing a search of previous posts

input shaft nut and have to do that repair as well. Also you must change the transmission fluid every 20,000 miles (30,000 suggested by Saturn) to ensure that no gunk or build up is in the valve body,

...input shaft nut in the trans,and or a bad valve body if you have no reverse you got a torn seal in the trans but if you have a torn seal you will have no second gear as well as they share this ...

input shaft nut on the transmission, and this is when the other forward gears begin to be noticed. The good news if this is the case is that the valve body is fairly easy to replace. Unlike just about

...shaft nut is 21001680. Another common no reverse condition is a faulty or defective vehicle speed sensor. The input from the VSS to the PCM should always read less than 5 mph. This allows the PCM to ...