2002 Land Rover Freelander "remove top transmission bolt" Questions

...remove top transmission bolts on a 2002 ford explorer How to reach top transmission bolts You will need two "special" tools. First a long (36" or so) extension, preferably 1/2" drive, and a swivel ...

...remove bolts out of 2003 for removal of transmission If you are talking about the two bolts on top of the bell housing. You will need a three foot extension with a swivel and 15 mm socket. To access ...

remove the air filter box exposing the top area to the transmission. on top of the transmission, you will see the transmission solenoid. box-like with three bolts. unplug harness's. get your drip pan,

...top, 2, 17mm bolts with nuts. Remove the bracket. Remove the lower inspection sheild, 3, 11mm bolts. From the underneath side, on the other side of the motor where the transmission joins the motor, ...

...remove top trans bolts how do u remove the top trans bolts Most transmission shops have a transmission jack to support trans and they remove the rear cross member and trans mount lowering the trans ...

next. The transmission is an Automatic 4x4 remove air filter and housing that be in the way.you need long off set flex ratchet wrench.you need off set box end wrenches to remove top transmission bolts

...Remove any of the top bell housing to accessible engine bolts 7. Chock rear wheel to raise the front of the vehicle 8. Drain all transmission fluid 9. Put the oil pan back in its position but only ...

...top of the tranny to remove and the shifter will come off. That is the only way to remove the shifter, it bolts into the top to make sure you can't just **** up on the shifter and pop it out of the ...

...top of the transmission next to two electrical connectors. Level plug is located on the bottom of the transmission, next to the selector cable. Use 5mm allen wrench to remove it, and fill the ...

...remove the top bolt and then the bottom bolt and pull the starter out of the transmission bell housing. You will have to angle the starter a little to remove it.Remove the wire that goes to the ...