2002 Land Rover Freelander "clutch pedal" Questions

Ad

Question about Land Rover Freelander

1 Answer

...clutch problem, the pedal seemed to delay returning to its normal position when engaged, and then suddenly the pedal went very loose and ultimately was unable to select a gear. Reservoir at master ...

Ad

...clutch pedal to the floor it doesn't engage until its almost hitting the floor? If thats correct then it is more than likely your slave cylinder or your fluid is low due to a bad slave cylinder. If ...

Ad

Question about Land Rover Freelander

1 Answer

no pressure on clutch pedal car will go into gear and drive pedal wontcome back up U have a failed hydraulic clutch master or slave cylinder, it is best to replace the pair.

Question about Land Rover Freelander

1 Answer

...freelander td4 02 plate has been losing power, now wont move, is it the clutch? If you put your car in 1'st gear, release the clutch pedal and nothing happens, absolutely the clutch is faulty. ...

...Clutch pedal seems to be working Ok, however Gears are difficult to engage. OK at normal temperature, but gets more difficult when the Clutch components heat up over the day. Can the bleeding of the ...

...clutch pedal at rest position is too low, when you press the clutch in you don't get full travel and gears are stiff to engage. Freelander td4 2004, clutch pedal at rest position is too low, when ...

Question about Land Rover Freelander

1 Answer

clutch pedal return too high clutch pedal retuns to high Freelander 1.8 clutch pedal height is set by the master cyl piston ram. Circlip has broken or come lose allowing the piston to come out ...

...Clutch Pedal indicate an airlocked system? Appreciate your Inputs.Will now primarily focus on the Clutch actuating components -- Fork/Lever & Travel distance.Hope that this can correct the Issue. ...

Question about Land Rover Freelander

1 Answer

Clutch pedal does not need to be lifted far away from floor before engaing, less travel than usual, 2003 TD4 , the pedal is not as firm as usual, softer pedal..... if its a clutch cable it been ...

Question about Land Rover Freelander

1 Answer

clutch pedal i want to know how to bleed the servo unit on the landrover freelander as my pedal is very hard to press down You cannot bleed a servo. it runs using the vacuum from either inlet manifold

Not finding what you are looking for?
2002 Land Rover Freelander Logo

1,319 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...