Question about Lincoln Town Car
...valve cover gasket on 2004 jeep grand cherokee torque settings (inch lbs etc) on the valve covers well what engine, must we magically guess that. but no matter, that, ive posted the FSM factor manual ...
...valve cover intake and exhaust manifolds. Remove the head bolts. Remove head and clean up block from old gasket material. Take the head to a machinist and make sure that it is not warped. If it is ...
Question about Lincoln Town Car
valve cover gasket on 2004 jeep grand cherokee 4.0? 17 foot pounds. 4:L page 17 engine 4L no its 85 inche/lbs (div by 12 ) is 7 foot lbs as you can see 7 foot lbs is hard to do on large wrench so Jeep
Question about Lincoln Town Car
3.7l engine. What are the torque specs for the plastic valve covers? alldata.com rtm?
...valve covers, one near the radiator and just north of the windshield washer fluid cap. I'm assuming it is the one near the radiator, but I wanted to check first and make sure. You will get your ...
valve clearances ? Get you a new gasket for the rocker cover, make sure you clean the mating surface good,and all traces of old gasket, and silicon etc. make sure you dont overtighten the bolts to the
...and thin you'v got to run it a little and wen it worms up take the valve cover back off and torque it at 70 witch is what most people forget to do and thats why the head gas kit does not last very ...
NEED TORQUE SPECS ON VALVE COVERS FOR 304 V8 1979 JEEP CJ7 Service manual states 50 INCH pounds.
valve cover gasket? Combination wrench set 1/4 " to 1" and/or 6mm to 19mm box-end & open-end or deep-well and short socket sets same size as wrenches with a 3/8" and 1/2" drive sets, Torque wrench
Question about Jeep Cars & Trucks
I have a 06 Jeep Commander with a 5.7 Hemi. What are the torque specs for the bolts on valve cover? A tech at dealr knows or ask a partstor
514 questions posted
Usually answered in minutes!
900 Questions
787 Questions
686 Questions
613 Questions
634 Questions