2001 Hyundai Santa Fe "replacing alternater belt" Questions

belt is off you must unhook any wires goin to the alternater and then there are two bolts at the bottom of the alternater holding it in place. Remove those and the alternater is loose then it may take

alternater belt is to narrow,it has to be close to flush with the outside edge of the pulley, look at the belt where goes around the radius of the alternater pulley,should be close to flat accross, if

...belt on the alternater take it to a local auto parts store to have them test your battery and alternater dont go to far though you might get stranded replace the alternater if its frading under 13.0 ...

...alternater belt and it still squeals. we have also tightened the alternater bracket. This SOUNDS as if (1.) A BELT is TOO LOOSE or (2.) you have BEARINGS that are FAILING in One of the PULLEYS the ...

...correctly and not slipping check all wires going to the alternater if they are ok then the chance are the alternater needs replacing. Let me know how you get on or if you need further assistance ...

...alternater checked and I replaced all wire ends I drove it today and halfway to work it started charging and once I pulled in the meter ( battery) whent to below halh charge help check the tension on ...

...alternater has a bad ground or your belt is to loose put a new ground on the alternater and tighten or replace the belt if its loose tht should do it also your regulater might be bad check that. You ...

alternater my alternater is squeeking is the belt too tight or not tight enough? i just replaced the alternater Too loose, tighten it up. Please don't forget to vote. thanks.

...belt or the alternater itself?help If the alternater light has come on in the car that means that the alternater is bad and you need to replace. You can also have it checked at your local auto parts ...

...alternater belt in my Mazda 626 lx Belt replacement alternater on a Mazda 626el If the alternator is on the top in the open, just loosen the alternator bolts a little bit. Then push the alternator to ...