2001 Hyundai Santa Fe "joint" Questions

94 grand voyager how to remove lower ball joint. will i damage seal? I am replacing axle but not ball joint. I will use ball joint removal tool That's the right way and only way to do this, just put ...

lower ball joints and leaking boots on my 2004 2.7 AWD santa fe hyundai how much work LaborSkill LevelMfg. WarrantyStandard Axle Shaft Replace Front Axle Intermediate ShaftB0.91.3Notes NOTE To R&R ...

how to change the front lower ball joints? YOU MAY NEED TO REPLACE THE LOWER CONTROL ARM AND BALL JOINT AS AN ASSEMBLE. AFTER MARKET BALL JOINT ARE AVAILABLE BUT MOST LIKELY WON'T WORK. GO TO THE ...

stiff steering banging noise on uneven roads hi you may have two problems.the banging noise can be either struts/shocks or ball joints.as for stiff steering can be either power steering. or ball ...

...if car continues to be driven in this condition? I would strongly suggest you replace the whole cv joint. If it is clicking then the joint is worn out. Driving it with no grease will cause the wear ...

Lower ball joint 2002 hyundi santa fe Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones ...

CV joints grinding I'm a self-confessed DIY mechanic, I have changed a motor, two gearboxes, a clurch and brakes and love to tinker. I now have a new challenge. I recently purchased a used Daewood ...

...probably the driveshaft on the other wheel. More than likely the coupling in the constant velocity joint/universal joint has broken. However, check the splined end on the end of the shaft first - ...

...by a pro. Possible broken/loose sway bar link...motor mount... control arm bushing.... ball joint.... strut assembly Is it front wheel drive if so could be a CV ...

...O rings for the application (usually coloured green). Before fitting the O ring and remaking the joint ensure it is thoroughly cleaned of corrosion, the threads are clean and in good condition and ...