1997 Geo Prizm "tach terminals" Questions

how to hook up a after market tach to a 1997 prizm w/a1.6 liter go to autometer website and look at there diagrams one wire goes to the igntion coil (- negative post or terminal) and one goes to key ...

...my RPM gage but I don't know where to put the wires!!!! I really need help!! thx:) The RPM guage (tachometer) reads the spark impulses from ground terminal of the high voltage sending unit. I've ...

putting in a autometer tach in a 1994 camaro without a painless wiring kit.what color is the negative wire for the tach hook up ?there is three on coil It should be black,but look on the coil,and it ...

terminals of the tachometer? 1978Chev.305 gas engine with distributor and coil.......jn my boat tach hook up for chevy with hei distribitor is 1)white wire ; 12volt source 2)red wire -12 volt ignition

Hey, I installed an alarm with remote start but it keeps tumbling but not starting. there is a tach -ve wire to connect but i did not connect it since my car don't have a tach. I need some help ...

Help! I cant find the green wire under my hood to hook up my tach? I dont see the coil,just the distributor. Can someone tell me where to attach my green wire from the tach? Its a 1986 chev.p/u 350. ...

...tach terminals. The B+ should go hot when you turn on the key. Use a test lite. If you use a testlight on the tach terminal, the lite should pulse when you crank it. It could be caused by the ...

Where is the wire that controls tach in 1987 Camaro? I changed the stock distributor to a HEI distributor in my 1987 Camaro. I need help locating the wire that I should hook up to distributor for tach

...side. If you have the HEI set-up, with the coil in the top of the distrbutor, then connect a Tach to the TACH terminal on the distributor and the other lead to battery negative, UNLESS the ...

...cases should be between 6,000 and 30,000 ohms. Be sure to test between the rotor button and both the BAT and TACH terminals. Replace the coil only if the readings in Step 1 and Step 2 are