1993 Geo Metro "axle" Questions

CV Axle removal and installation A friend recently replaced my Drivers side CV axle on my 95 Geo Metro, manual trans, 3 cyl, 1.0L. During the process he somehow tore the output axle seal and it ...

Replacing my CV Axles The driver's side front CV axle on my 2000 Chevy Metro broke on a turn a couple of days ago. My friend is going to help me replace both front CV axles, but I need to buy them, ...

...or swerve to the left makes it louder. Does anybody know what this could be? Drivers side drive axle was sloppy and replaced didn't help problem. Noises from axles can be really deceiving. The ...

installation of drive axle for 95 metro 1.3L I have the part in, but not all the way in. Should I tap or hammer it in? Yes - there's a snap ring or c-clip on the splined end that goes into the ...

98 chevy metro were to put in tran fluid I chang axle lost fluid need to know how or were to put fluid back in some came out of the car when I pulled the axle I pulled out the axle some fluid came out

...rattleing some. Thank you in advance. Ben First, did you check the price difference on a complete axle (saves time and aggravation of doing joint & boot) Most times you can get them apart by ...

right drive axle attempting to install a right drive axle on a 1994 geo prism and the tire is wobbling at the hub hi don,t know if the first e-mail got through so the wobbling is the wheel bearing ...

Fluid leaking from rear axle assembly on a 2006 Fwd ford escape a Geo ford? but you do have a blown seal. service time , to rear axle bearings.

...do i have to do the outer also? your best off to do both inner and outer CV joints, but a rebuilt axle is not very expensive and a lot of times is the best remedy, shop around for a rebuilt ...

...the end of the CV joint on the drive shaft has to go through a hole down the center of the support axle. So the support axle has to be wider, and therefore the bearings are always pressed on. To ...