1993 Geo Metro "2nd gear" Questions

grinds into 2nd gear and sometimes won't go into 2nd gear. Also noise in 1st gear sounds like the synchro mesh is shot, look at rebuilt transmission , usually cheaper than the gears them selves.

...2nd gear. Cannot shift once car is started - grinds gears when tried. Thought the starter pinion might be stuck but just replaced that and did not fix problem. Any suggestions? Hi, In all likelihood ...

...CAR DOES NOT MOVE WHEN CLUTCH IS RELEASED. PROBLEM STARTED WITH POPPING OUT OF FIRST GEAR; WENT TO START'G OUT IN 2nd. GEAR. THEN FINALLY STOPPED WORK';G AT ALL. clutch needs to be

...1st and 2nd, but, no third gear. No previous indication of problems. Is this possible fluids problem, or hardware? On these cars the issue is usually worn shifter bushing's, replace all of

...gear engages not first what does 2nd and reverse share? The accelator cable is "Y" shaped. one side goes to the carb and the other to the tranmission. If you have the carb.side too tight it will give ...

...gear for couple months now 2nd is getting hard to downshift and upshift have replaced rubber bushings bolts etc.on shift linkage adjusted etc. Sounds like your synchronization rings inside the tranny ...

What are the gear ratios of my 1.3l 5speed transmission? 1st = 3.416 2nd = 1.894 3rd = 1.28 4th = 0.914 5th = 0.757 final drive = 4.39

2nd gear is a little hard to get into to, but 3rd 4th and 5th are fine. Reverse is also difficult. The shop doesn't open back up for a few days and I plan on taking it back. What happened? Sounds like

...gear? i still can use 1st and 2nd gera and 5th and reverse. the car had been shifting into third with a grinding noise sometimes and then oter time just fine and all of the sudden it will not shift ...

...2nd, but it won't work in 5th gear at all, and after brief trips at highway speed which I do in my daily comute, it doesnt want to go into gear at all !! I pretty much hear grinding now when I do ...