1992 Geo Tracker "cylinder" Questions

...pressure? hey i have a 1992 geo tracker and i did a disk break conversion on it i got a new master cylinder and bleed everything but there is no front break pressure. there is no leaks in the master ...

can not get a pedal, replaced master cylinder twice, bled everything, no pedal...can't seem to get fluid out of the 3 front ports on the master cylinder...could both master cylinders be defective, or ...

miss firing on #1 cylinder .lots of white smoke replaced injector.no change .170lb. compression on all cylinders.unplug injector not so much smoke. at times miss firing on one cylinder is caused by ...

...inside the cap and locate the position of the wires. The one towards the flywheel is the Number 1 cylinder. Even the length of the wires should give you an idea of its cylinder unless the ...

I'm changing a timing belt on a 1995 geo tracker is the #4 cylinder the one clostest to the fire wall Yes, #4 is the cylinder closest to the firewall. The cylinders are numbered starting from the ...

...The problem is within the timing. Pull all spark plugs, disconnect ignition coil and clear the cylinders to be certain the cylinders are not flooded. Install all plugs, connect the coil and get ...

My brake pedal went to the floor, brought it in...They told me it was the Master Cylinder. They changed it and put in a brand new master cylinder but it still seems like the brake pedal goes further t

...injector. If your injector is faulty or stuck open and allowing more gas than it should into the cylinder it will cause white smoke and enough gas will cause a gas smell and may end up soaking

Engine is misfiring Had a code that #5 cylinder was misfiring, replaced plug and boot, still misfiring sounds like it could be a injector or the conection to the injector thats asuming the cylinder is

I have 2002 Chevrolet tracker p0300 misfit Cylinder Misfire Detected Random Cylinders http://www.autocodes.com/p0300_chevrolet.html