2005 Kia Amanti "change wiper blade motor" Questions

...is removed you can then see the wiper motor. Just remember once you change it over you need to time the motor if done wrong the wiper blades will just go down instead of going across the

...wiper motor out. They worked without the blades on, but after installing the blades they tried to move down toward the hood. I think the motor still works but it seems the shafts are just turning in ...

...WIPER MOTOR ON. if you changed your wiper motor and did not turn it on and let the motor return to park before installing blades,i would remove the blades ,turn on the wipers and then off and ...

wiper motor does not start. problem triggered after wipe cycle with new wipers installed but in wrong positions - wipers struck each other & stopped . checked fuse 25 A not blown - tried replacing

Wiper blade slipped loose in heavy rain. Driving a 2006 Buick Lucerne, a wiper blade slipped loose in heavy rain which caused both blades to stop. I pulled over and re-set the loose blade. But when I ...

...change front wiper motor on 1993 ford explorer Hi there, Turn the ignition on, and turn the front windshield wipers on. When the wipers are facing straight up on the window, turn the ignition off so ...

...if so, how do you get to it? It's stick out of sterring column Try changing the Pulse Module on the wiper motor, I a similar problem. I changed the module and it fixed the problem. Cost about ...

...wiper moter went out i need to change it out. how do i change it? Disconnect the negative battery cable. Remove both wiper arm and blade assemblies. Remove the cowl grille attaching screws and lift ...

change the windsheild wiper motor?? i can not get the wiper itsself off??? HELP!!!! If your just changing the wiper blades, turn the wipers on and when they get to the top, take the key out. They dont

...on my sunfire   change the blades position by opening the wiper mining screw place in position  and tight it see the neutral control in inside the wiper motor for currect ...